convertible top for Fiberfab

Home Forums Site convertible top for Fiberfab

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #306080
    josephrpena
    Participant

    @josephrpena

    Hi my name is Joe
    Can any one help me to figure out what I need to get to install a top on my car if anyone could guide me in the right direction sincerly appreciate.

    my email is Pena3822@gmail.com

    thank you

    #306083
    crash55
    Participant

    @crash55

    just got done talking to stewartpeters about his top. the guys that did mine were not interested in doing his. I have no answer why ,so it looks like MG magic might be the way to go or a local shop that do boat covers good luck & keep us posted

    #306091
    yosemitesam
    Participant

    @yosemitesam

    MG Magic has a nice top for around 500 if you have the frame.I bought one a few years ago,good fit.The snap kit they send is close to useless,I got a good one from ebay. If you don’t have the frame I just bought a tonneau cover(same place) that keeps the rain out when you’re parked.

    #306417
    mglondonroadste
    Participant

    @mglondonroadste

    My Fiber Fab will need a new top if I ever get her running again. I never came with one when I got her. I let her sit too long without running her and I have a big job of trying to get this engine started again. I’m taking one project at a time, and the London Roadster is first on the list. I may need a new top for it, as well. Luckily there is a top shop not too far away. They aren’t cheap, but they did a good job on my Honda S2000 a couple of years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Skip to toolbar