Grill for ford kit

Home Forums MGTD Kit Cars Chevy/Ford Kits Grill for ford kit

This topic contains 4 replies, has 3 voices, and was last updated by  scubasteve 2 months, 4 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #303914

    ldj1002
    Participant

    @ldj1002

    I have 1 slat missing in my grill. Hopefully someone will have one I can buy so I don’t have to buy the full set. To remove the grill can I remove the 4 bolts, 2 showing in photo with line between, and that will let the complete grill come out?

     

     

    • This topic was modified 3 months ago by  ldj1002.
    • This topic was modified 3 months ago by  ldj1002.
    • This topic was modified 3 months ago by  ldj1002.
    #303918

    ldj1002
    Participant

    @ldj1002

    #303950

    ldj1002
    Participant

    @ldj1002

    I got the grill out, those 4 bolts did it. I replaced all the grill bars with golf club shafts. I know they are round and not like what was originally in the grill but a MG replica by it’s nature isn’t original. I think the round shafts look good and certainly a lot cheaper, cost was zero. See photos how I attached them. Talking about photos I am unable to insert a photo. When I try I lose everything I had there and only the inserted photo is all I end up with. I found out I can edit it and add 1 more with each edit. Is there any other way to do this?

     

    • This reply was modified 2 months, 4 weeks ago by  ldj1002.
    • This reply was modified 2 months, 4 weeks ago by  ldj1002.
    #303953

    billnparts
    Participant

    @billnparts

    That doesn’t look bad at all. It’s unique. No two of these cars are alike.

    Carry on.👍

    Bill Ascheman
    Fiberfab Ford
    Modified 5.0, 5sp., 4:11
    Autocross & Hillclimb
    "Drive Happy"

    #303955

    scubasteve
    Participant

    @scubasteve

    Two BIG thumbs up for your outside the box thinking! 💡  💡  Your repairs are very nice and I doubt anyone could see the patch.I know I can’t.

    It seems like 99% of the fixes for our cars is sort of “seat of the pants” type. Kind of ,”This just might WORK!” then it DOES! That’s why I keep a big pile of scrap metal around.

    Another one for the TDr (re)engineering department!

     

    Amor Conquista Todo

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Skip to toolbar