- This topic has 4 replies, 3 voices, and was last updated 10 years, 3 months ago by
.
-
Posts
-
Need a little help from the chevy owners . I need to know where the tach hooks up to on the motor, I know it’s a red wire on the dash.
ray10 2014-10-08 21:07:56 TDREPLICA Map
http://www.arcgis.com/home/webmap/viewer.html?webmap=7f9174ad614e43b680deba085b0abf48
Still need a little help here? Just need to know where it hooks up to on the chevy motor ?
TDREPLICA Map
http://www.arcgis.com/home/webmap/viewer.html?webmap=7f9174ad614e43b680deba085b0abf48
Most electric tachs connect to the coil or distributor where it can ‘see’ the pulses. Electronic tachs may need to connect to the computer. Mechanical tachs (Which I understand you don’t have) come off the cam shaft or distributor drive.
I hope this helps.No trees were injured in the making of this message, but some electrons were inconvenienced.
You should have two wires to the coil. Hot wire coming in and the other going to the distributor. Connect the tach wire to the distributor circuit.
Bill Ascheman
Fiberfab Ford
Modified 5.0, 5sp., 4:11
Autocross & Hillclimb
"Drive Happy"
- You must be logged in to reply to this topic.