well, was able to at least look at the rear set up, and, you’re right, they are different, so, when I get it up on the lift, it’s gonna be a picture fest, and some clean up.
heater cable disconnected, odd bolts holding the bottom of the shocks in, from what it looks like, and, the PO installed some copper tubing for a throttle cable casing. need to replace the purple wire loom that was put in the engine bay, too.
also, was able to dig out the newly rebuilt B front cross member to get the parts to replace the front brakes. it has all new parts on it, so, I’m just gonna remove, and replace the pads and rotors, and, finish stripping it for possible needed parts later on down the road.