Finally Started Working on the TD Again

Home Forums MGTD Kit Cars VW Based Kits Finally Started Working on the TD Again

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #233719
    Jeff Troy
    Participant

    @jeff-troy

    Hi, Group,

    Couldn’t get much done last year, but this one’s been a bit better timewise. Got most of the glass parts hung, and discovering just how poorly the scribe lines and drill marks are located on some of these parts, particularly the cowls and front fenders.

    Really enjoying the build, but the grille-to-hood fit is beyond ridiculous. I noticed the same ill-fitting hood on other cars also. The curve of the hood on the passenger side is much sharper than the curve of the grille, and the result is an ugly gap that physically cannot close.

    Have other original owner/builders done anything to remedy this production error? If so, what?

    Thanks and warmest regards,

    #246712
    Paul Mossberg
    Keymaster

    @pmossberg

    Jeff,

    Welcome back! 🙂

    Didn’t have the hood problem on my Duchess. But….

    Does the hood look like it was molded wrong? Or is it warped?

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.