OK. I’ll keep at it.

Here’s the first color coat double-blocked with 600 grit. I kinda like this matte finish. All the kids are wrapping their cars to look kinda like this…

So what do you think, boys? Shoot two more coats and clear it? Or just scrub the whole car with a scotchbrite and call it a day?

Clutch chatter sometimes comes from the wrong Bowden tube. Make sure it dips about an inch, to an inch and a half. Another thing to check is the transmission mounts. If there’s some give in those, replace them. The last common possibility is the disc or pressure plate. If a little oil gets on it or something like that you can get chatter. But…[Read more]

Well, it’s paint day, boys.

Final primer-sealer coat this afternoon followed by the red stuff. Looks a lot better this time around but of course I got a nasty run on the scuttle and gouged out a wet spot with the sprayer. And a couple spots not yet quite covering.

So it goes.

More on the blog.

Well, it’s paint day, boys.

Final primer-sealer coat this afternoon followed by the red stuff. Looks a lot better this time around but of course I got a nasty run on the scuttle and gouged out a wet spot with the sprayer. And a couple spots not yet quite covering.

So it goes.

We’s racin’!

Following Roy’s sage advice I have been working with No Paint. Just a sponge, a bucket and a sheet of 400.

Seems to be working.

I got the wheels bolted on snug (thanks again, Allen) and shot some truck bed liner up under the fenders to cover the ‘glass work and (supposedly) prevent star cracking from rocks and such.

Following Roy’s sage advice I have been working with No Paint. Just a sponge, a bucket and a sheet of 400.

Seems to be working.

I got the wheels bolted on snug (thanks) and shot some truck bed liner up under the fenders to cover the ‘glass work and (supposedly) prevent star cracking from rocks and such.

Following Roy’s sage advice I have been working with No Paint. Just a sponge, a bucket and a sheet of 400.

Seems to be working.

Definitely VA Beach this year in Bridget, Roy. And maybe in the Spyder in 2018. I had a German grandmother but the only word she ever taught me was “hundsbutza,” which she told me was dog poop and apparently that isn’t even true.

And great to hear about the Cooperization. I really want to drive that car at least round the block, if you’ll allow…[Read more]

That looks like a lot of cutting and welding. Will you bolt it to the bucket or weld it?

Emma seems like a good one to me. But this is really a personal matter. In my experience, the car suggests the name. I don’t remember thinking about naming Bridget.

Same thing with my mom’s old Nova when i was a kid. The car was called “Bess,” and that was that. My dad’s Nova, basically the same car, did not get a name. And my Nova–also the…[Read more]

Good to meet ya, rabien73. I’m Ed.

Good on ya, Greg.  And right, same thing happened when I had the tire guys slap on new tires and align it. Driving home I thought I was gonna die. Car wandered and rode so rough. Checked the tire pressure in the driveway: 36 all around.

Set them at like 16 and 24 and was instantly happy.

Allen: THANK YOU!

Got the front axle nuts today and went out to replace the busted one on Bridget. Can’t thank you enough.