gauges gauges gauges

Home › Forums › General Discussion › gauges gauges gauges

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 16, 2009 at 11:58 am #232682
    Guests
    Participant

    @guests

    Hello all. another MGTD kitcar owner here.

    Cant seem to find gauges. or should I say as soon as I say aircooled VW nobody seems to know what to do… mainly because of senders.

    I would like to put some classic looking gauges like vdo heritage or autometer oldies.

    anyone done this?

    July 16, 2009 at 3:56 pm #239307
    Paul Mossberg
    Keymaster

    @pmossberg

    VDO sending units at:

    http://www2.cip1.com/SearchResults.asp?Cat=1763

    If you already have a source for VDO Heritage, the sending units above should work with them.

     

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

    July 16, 2009 at 4:01 pm #239308
    Roland Smullen
    Participant

    @rollie

    Hi, I went to http://www.egauges.com and went with the VDO Cockpit Royal group as that group had a oil temperature gauge. I e-mailed the co. and told them what kit car on what doner car I had and they responded with the sender numbers to match the chosen gauges. I have a speedometer, tach, volt, fuel, and oil temp gauges on the way. Haven’t seen them yet as I am not home this week. I wanted a clock also and went with the Autometer Old Tyme white. I wanted a 90-95 mph speedometer, but none was available in the style and size I wanted. The speedometer and tach I bought are 3 1/8″ dia. as the holes in the dash are 3″, and I didn’t want the hassle of opening them up to 3 3/8″ or 5″. Hope this helps, Rollie

     

    July 20, 2009 at 10:08 am #239309
    Mark Hendrickson
    Participant

    @pink-mg

    http://www.classicinstruments.com/

    Real TD’s had large (5″ ?) diameter Speedo & Tach too. Not the 3.5″ diameter we usually see in our replica’s.

    You really only need a Speedo & TACH both (large diameter), Fuel, Oil Pressure and Volts. The head temp senders are usually a spark plug washer style sensor.

    August 5, 2009 at 9:51 pm #239310
    Brian Key
    Participant

    @mpavble

    I believe that it is still possible to get Smiths gauges rom the UK.  Not sure about cost but they do look cool.Classic instruments as recomended above are realy nice to.  i looking at changing mine to so that they look more like the originals.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.