-
Stephen Houser replied to the topic Lindon Roadster parts? in the forum General Discussion 9 months, 1 week ago
I have a 1982 London Roadster. The top got quite beat up by southern Florida sun and salt-water. I asked around at a few boat shops (coastal Maine), but none would take on the job. That was about 20 years ago so my memory is a bit faded as to the reasons they gave.
I ended up making a new one myself. I ruined a sewing machine and what seemed like…[Read more]
-
billnparts replied to the topic Lindon Roadster parts? in the forum General Discussion 9 months, 1 week ago
Well if a ready made top is not available, the next best option would be to have one made. A good tri, shop would be able to make one from scratch. check out boat upholsterers.
-
MGLondonRoadste started the topic Lindon Roadster parts? in the forum General Discussion 9 months, 1 week ago
While my London Roadster is running, I will need a new top for it. The only gauge working now or correctly is the speedometer, I think. The fuel level gauge, tachometer, oil pressure gauges do not appear to be working at all.
Magic MG does not carry tops that will fit the LR. Any thoughts or other sources?
-
Stephen Houser started the topic Nov 12, 2024: More back-end updates… in the forum Site Input and Issues 9 months, 2 weeks ago
On Nov 12th, more back-end updates.
As is the world of software, there are always more updates on the way. I expect there to be minimal downtime.
Stephen
-
Stefan replied to the topic Final Drive Seal in the forum VW Based Kits 9 months, 3 weeks ago
Want to reply to myself in case it helps anyone in the future.
The seal needs to be the right size: 36x60x9.5 worked much easier than the other larger types I tried.
Anything large enough to encompass the seals diameter will work to hammer on. I used a spool of soldering wire, but even a specific seal drivers can be bought at Harbor Freight for…[Read more]
-
foolthrottle replied to the topic WTB: Ford or Chevette based TD in the forum MGTD Cars WANTED 9 months, 3 weeks ago
Dbanta
sent info
-
Dbanta replied to the topic WTB: Ford or Chevette based TD in the forum MGTD Cars WANTED 9 months, 3 weeks ago
<p style=”text-align: left;”>How much are you asking? You can email pictures to dbanta@banta-group.com. thanks.</p>
-
foolthrottle replied to the topic WTB: Ford or Chevette based TD in the forum MGTD Cars WANTED 9 months, 3 weeks ago
Chevette based kit CMC un assembled complete no engine or trans, everything else, red. I have a 350 chev v8 and 4 speed that could be included. My plan was to build an open wheel vintage look hot rod. I could also include a car hauler trailer for additional.
Car kit is located in Colorado, can e-mail pictures on request
-
Stefan started the topic Final Drive Seal in the forum VW Based Kits 9 months, 4 weeks ago
I cannot seem to get this final drive seal on my transmission. I wanted to use a socket and hammer it in, but I do not own a big enough socket to do so. It seems like the 36x60x45 seal I have tried using was too large, and subsequent seals that I have bought have not fit either. I bought some 36x60x36 seals to try again for the third time.
I want…[Read more]
-
Gary accepted an invitation from Paul Mossberg and became a registered member 10 months ago
-
Tater Schuld accepted an invitation from Paul Mossberg and became a registered member 10 months ago
-
Michael Tivey posted an update 10 months ago
@pmossberg Hi I have just joined the club and had a quick run through of the site. I have a 1953 Allison Daytona but have not seen any mentions of Allison’s on here but did have Daytona. Can I take it as this is the Allison? Thank you from Mike T.
-
Michael Tivey accepted an invitation from Paul Mossberg and became a registered member 10 months ago
-
Welcome!
-
Thank you, I’m trying to get used to the site and upload a photo of my Allison MG TD Daytona
-
-
-
Molly Paradise changed their profile picture 10 months, 1 week ago
-
Molly Paradise replied to the topic MG TD REPLICA REGISTRY in the forum Car Registry 10 months, 1 week ago
Molly Paradise (@mollymayhem) Munfordville, Kentucky 1980 Daytona MIGI Daytona Automotive Fiberglass,VW ’71 CA. Red. White. Factory
-
John Ware posted an update 10 months, 1 week ago
What’s new That would me. New kid in town. Car guy for over 7 decades and kit car guy since the 60s. Computers are the bane of my existence , but I use them because they are handy. Usually with multiple errors, so I beg your understanding in advance. I recently picked up a partially done kit with what I hope are the majority of pieces. Time will…[Read more]
-
John Ware accepted an invitation from Paul Mossberg and became a registered member 10 months, 1 week ago
-
Richard Abbott accepted an invitation from Paul Mossberg and became a registered member 10 months, 1 week ago
-
billnparts started the topic Pocono Raceway in the forum Clubs and Show 10 months, 2 weeks ago
Well, I checked another item from my bucket list. I went and took my MG to Pocono Raceway last Thursday for one of the SCCA’s Track Night in America events. This video is from one of four sessions they give you. There are different classes relating to skill level. This is from a Novice session. I’ve a lot of seat time racing this car, but it was…[Read more]
-
billnparts replied to the topic Oil Dipstick guide detached in the forum Chevy/Ford Kits 10 months, 2 weeks ago
As I recall it’s on the left side of the block just above the oil pan on a flat boss apx. halfway along the block. When mine pulled out I simply epoxied it back in.
- Load More
