Home › Forums › General Discussion › Fiberfab/CMC serial Numbers
- This topic has 8 replies, 8 voices, and was last updated 12 years, 2 months ago by Rob Haettich.
-
AuthorPosts
-
September 3, 2012 at 7:56 pm #234292
Got an email from a new TD replica owner. Hope I don’t spoil my reputation. But I was not able to answer the question. So….here it is:
We recently acquired a pinto based ( suspension and engine/transmission
) TD replica . Vin number on frame is PTD 00615 . I contacted Dan
Richer at Fiberfab . He thinks the Fiberfab kit VIN numbers started with ff , but has no records prior to 2002 . Does this make it a CMC kit
or were there others using this combination? Anyone have any ideas?PMOSSBERG 2012-09-03 20:16:38 Paul Mossberg
Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
2005 Intermeccanica RoadsterIf you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)
September 3, 2012 at 8:06 pm #251729AnonymousInactiveCould it be a factory built car? Posibaly P for Pinto and TD for type? Then number of car made.
I have no facts to back this up . It is a guess at what it might be.September 3, 2012 at 8:33 pm #251730When i was hunting mine i saw one advertised on ebay.It got my attention because at one tme i owned a pinto.That was a year and a half ago.I don’t know how i know but i think it wa built in a private garage.
September 3, 2012 at 9:05 pm #251731I have a CMC/Fiberfab VW based kit. Everything in the paperwork states Fiberfab except the Assembly Manual which states CMC/Fiberfab. The tag that came with the paperwork states Fibrefab International and states the serial number as FM1876. My guess is “F” for Fiberfab and “M” for CMC but its just my guess.
Allen Caron
VW based 53MGTD - "MoneyPenny"
"If one thing matters, everything matters" - from the book The ShackSeptember 4, 2012 at 8:27 pm #251732I’m not aware of any serial number accompanying my kit.
It’s been so long maybe there is one somewhere, but I’ve never seen it.
I’ve also never looked.Bill Ascheman
Fiberfab Ford
Modified 5.0, 5sp., 4:11
Autocross & Hillclimb
"Drive Happy"September 4, 2012 at 9:52 pm #251733My factory number, on my MiGi TD started with FM prefix 19xx on a chevy chevette kit . Dan
September 5, 2012 at 7:23 am #251734Mine is a CMC Pinto base and has the CMC brass plate under the dash # M15xx. Title reads the same.
September 5, 2012 at 8:49 am #251735Thanks gang.
Keep those ideas coming!Paul Mossberg
Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
2005 Intermeccanica RoadsterIf you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)
September 20, 2012 at 11:53 am #251736I have two TD’s, the first on I bought complete and running. The serial number on the fire wall is FM2410 and that is stamped on a brass plate from FiberFab International. The second one, is not complete, has no paper work with it and the only numbers I can find is 41-0205. raised numbers in the floor behind the passengers seat. Both cars are set up for Pinto, first is 4 cyl auto, second V6 4 speed. Second car isn’t titled yet, first cars VIN FM2410.
-
AuthorPosts
- You must be logged in to reply to this topic.