Thanks to all for your great ideas.

Checked fuses by removing and replacing.  Will need to buy the garage light.  At least another start.   Tks

Thanks All

No voltmeter, Ground cable looks ok.  tried jumper cable, with the neg. and tried connected to another car.  Still nothing.  Guess time for tow in.

Fuses were the first thing I checked.

Tks, that is another place to check.

Sparked on steering when the wrench hit the column while taking off the pos cable.

September is “Elitchka” photo taken at 57th Fighter Group Restaurant in Atlanta.  Purchased at an auction here in Atlanta.  Built by American Custom Cars in Houston TX.  states “Empress I”  1600 engine on 74 frame.   so far new transmission, rear axles, bearings, brakes, accelerator cable.  Thank you for including me in.
 

Thanks for including me.  Put me down for 2

Currenttoy40874.6315162037

Kmart has a shelter with a door.  too large for the area I would need it to fit.
http://www.kmart.com/shelterlogic-10-ft-x-20-ft-auto-storage -shelter/p-082W541991110001P
 PMOSSBERG40850.5141203704

Looking at the champer – could you just use any small metal can/box and put some holes in the top and glue on a magnet?  Then just buy the oil or put in the mothballs.  Mine also sits out with only a cover and I am watching all the responses to see what I can do to make sure I do not come out; take off the cover, to find a raccoon living in mine. 

Thank you, yes I have the book.  I did not use it the first time when I messed up the adjustment – used directions off net.  Now using the book. Dont know if I should just get used to the sound.

Thank you one and all. I did a valve adjustment.  Ellitchka was running rough – very much 1,2,3.4-sounding. 
I used the info from Samba to try an adjustment for for first time- took about 2 hours. I really messed it up. When I drove it was clacking and and very loud. Quickly parked. I Went back to the Muire Book and found that my TCD mark was of…[Read more]

That is from the same company that produced  mine in Houston Tx. An Empress I. I do not have the pin strips and not sure that  I have the same number of snaps on the sides.
 

Thank you all for the welcome
The car was built in Texas. Motor is in the rear and looks like a Duchess. But I do not remember it saying that on the plaque mounted under the hood.  It has the bump at the fender not smooh like the Fiber.
I am in Atlanta.  Hard to find someone to work on it.
I found one place that I am using and it came highl…[Read more]