Forum Replies Created
-
Posts
-
God I love technology, and a buddy with a 3D printer! If only I had one, of either. While I admittedly haven’t shopped around for a 3D printer or the materials required to produce parts, I imagine the buy in is in the realm of the sum being far beyond the contents of it’s parts. For now anyway.
Thanks toller and kall! I replaced one lamp first. Nope. I cut out all that ridiculous looking , mismatched, multicolor, wiring under the bonnet and rewired the headlights directly to the loom with the connections as they had been, minus the whips and with matching crimps, looks great! No headlights. I ran a wire from the negative post on the (new) battery to the ground on each headlight, nope. The fuse, I should say, was the first thing I checked and appears to be fine, but I spun it around a few times just to make sure the contact was good. So, I figured its the switch right? Gotta be. Bought an identical switch from MG Magic, swapped it out and….nope. No fog light, no headlights. BUT, the brake lights and turn signals have always worked perfectly, front and back so, I’m at the end of my depth when it comes to electrical stuff, I have a very limited bag of tricks. I think I’ll take it to Midwest Hot Rods, I can walk home from there!
