Donny Hughes

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #267552
    Donny Hughes
    Participant

    @taildrager

    Yes that looks like mine . I like the idea of the slight crown in the windshield . It looks fine with a painted grill .

    #267546
    Donny Hughes
    Participant

    @taildrager

    time, tools, room, ability, etc,  Are not the problem what i lack mostly is ambition !

    #267541
    Donny Hughes
    Participant

    @taildrager

    If you knew me you would know i need the project like I need another orifice . I have a fair accumulation of VW parts . And Bug Eyed VW is only about 15 miles away so i have a close source for the parts i may need to put some of this junk i have been falling over to some good .
      My firs task is to pull the body and put pans in it and move the peddles as far forward as i can get them

     This thought might warrant another  thread but on the subject of the hand brake . Mine is still in the stock location and i have the bench seat that i prefer .
    It seem like a simple solution would be rob a ebrake mechanism out of some thing  that has the tube with the t handle that you pull out to engage and turn a 1/4 turn to release could be mounted  under the center of the dash . Take the ratchet mec out of the VW handle and with a cable and a pulley you could go off the VW handle straight up over the pulley than to the back of the tube . I can not see where a T handle under the center of dash would look any worse than the ebrake lever does that you can not use .     

    #267539
    Donny Hughes
    Participant

    @taildrager

    O I for got to add it does not run its locked up . But that does not present any problems I am fortunate to have a fairly well equipped shop    

    #267538
    Donny Hughes
    Participant

    @taildrager

    Yes the grill is no thing of beauty  I am still hoping to learn some more about chrome vinyl wrap .This may be offensive to some but it a fiberglass replica so what the harm in adding a little vinyl

    #267537
    Donny Hughes
    Participant

    @taildrager

    I just went over to Samba no Subaru for me I want to drive it before i Die not to mention the cost . A fresh overhaul will make it go fast enough to scratch my itch . 

    #267534
    Donny Hughes
    Participant

    @taildrager

    Lets talk about Subaru power what is involved ?

    #267531
    Donny Hughes
    Participant

    @taildrager

     And all of this for 500.00 dollars it would have been a bargain at half that price .Like those guys on American pickers say its all roached out ! I think it look Gangster  The Edward G Robinson kind of Gangster .

    taildrager2016-03-25 20:47:07

    #267530
    Donny Hughes
    Participant

    @taildrager

    #267529
    Donny Hughes
    Participant

    @taildrager

    #267528
    Donny Hughes
    Participant

    @taildrager

    #267527
    Donny Hughes
    Participant

    @taildrager

    #267526
    Donny Hughes
    Participant

    @taildrager

    #267521
    Donny Hughes
    Participant

    @taildrager

            Yes its been awhile .But I still have a 7ECA Citabra  . I started out with my first plane being a Tomahawk but i wanted to be a real pilot so i bought a 1955 170B and before i even had  my licenses I also owned a 1952 Cessna 195 with a 275 hp Jacobs then a Maule with a Franklin JUNK ! and now the 7ECA .
      I am not one that is crazy about avionics. One good radio and a hand held GPS , full fuel and if  can get it to crank I’m gone .  

    taildrager2016-03-25 09:34:53

    #267519
    Donny Hughes
    Participant

    @taildrager

       I have not figured out how to post a pic. yet ?
     But I do believe that my rear fenders were from the factory this way because of the jell coat   

Viewing 15 posts - 1 through 15 (of 15 total)