- This topic has 3 replies, 3 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
I was not sure if anyone would be interested, but found the following lights on Ebay. They arent exactly period, but could make for a decent replacement light. I have not ordered from this vendor before so I cant state these to be a quality product.
Mike
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem& ;item=200629357197
Keep in mind that you CANNOT use a regular flasher with LED lights. They don’t draw enough current to make the conventional flashers work.
You need to buy an electronic flasher, some of which actually have a ground wire pigtail attached. http://www.rodworx.com
That information is good to know Pink. Would the standard flasher be ok as long as the front led lights were used along with the standard lights in the rear?
Mike, I asked Mark [Pink MG] about ADDING LEDs to the rear of my TD in addition to the existing lights. He said that the two types would work together with the regular flasher when wired into the same circuit. However , if you REPLACED the front lights with LEDs, I wonder if the effect might be a faster blink like can occur when a bulb has burned out. Not sure about this ,just reasoning that a flasher designed to blink properly with two bulbs,would not work the same if half of the load was removed and replaced with the smaller draw of the LED.
- You must be logged in to reply to this topic.