So it begins…

Home Forums General Discussion So it begins…

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #309575
    Jack
    Participant

    @jazxx62

    I officially “joined the club” at 9am, when the flatbed dropped off my Barn Find, 1984 FiberFab TD. It has a generator, so I’m  assuming it’s an older motor, as it has a generator.

     

    If anyone can offer any tips on the following, I’d be greatful…

    Anyone know how to put the seat back on a FiberFab build?

    What is the best way to get at the cylinders on these older motors?

    The back wheels are frozen from sitting 10 years. Loading/unloading did not break them free as hoped.

    Thanks,

    Jack

     

     

     

    #309577
    billnparts
    Participant

    @billnparts

    Hi Jack.   Welcome!   Congratulations on your new addition.

    Instructions for your seat can be found in the library. All the build manuals are found there.

    Not being a VW guy, I can’t help with anything else.

    Enjoy your build.

    Bill Ascheman
    Fiberfab Ford
    Modified 5.0, 5sp., 4:11
    Autocross & Hillclimb
    "Drive Happy"

    #309578
    edward ericson
    Participant

    @edsnova

    Welcome to the club, Jack. Your cylinders are under the fan shroud. You get a clear view of them from underneath. If you’re new to the air-cooled VW hobby pick up a used copy of the Muir book linked here. You’re going to be replacing some seals, wheel cylinders, etc. before you get any appreciable seat time in that baby.

    Enjoy the ride!

    #309584
    Jack
    Participant

    @jazxx62

    I did pick up the book. Wonderful reference, thanks.

    Does anyone know where I can get a key 🔑 blank for these? I only got one key. it’s a Cole GE30. None of the little hardware stores near by have a blank. One said he’d cut them, So far, I’ve only found cut ones online. Any suggestions?

     

    #309598
    Paul Mossberg
    Keymaster

    @pmossberg

    This one is challenging!

    I found two comprehensive key blank cross reference documents. Neither has a Cole GE30.

    This document shows dozens of Cole key codes, but no pics of the blanks: https://manuals.plus/m/88ed988d42caa0b42c8f9c3eb732893741923435c464ddfbb9205bb6b013e902

    This document shows pictures of key blanks, perhaps you will be able to match your key visually. http://unencrypted.web.itd.umich.edu/~pfs/fun/tools/Ilco_keyblanks.pdf

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.