Duchess Steering Wheel

Home Forums MGTD Kit Cars Manufacturer Comparison Duchess Steering Wheel

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #234857
    Jeff
    Participant

    @jeffthornton

    Does anyone have a scan of the documentation that came with the Duchess steering wheel. When I got mine, it was only being held on with the single shaft column nut! I found the button, plate, spring and one small shoulder bolt on the floor. I think I have an idea of how it goes together but the two shoulder bolts, I don’t have. Fastenal says that they are 1/4-28 fine, but in a VW? And the local hardware thinks that they are 6.5mmx? anyone know what they are supposed to be?

    Jeff

    #257421
    billnparts
    Participant

    @billnparts

    check installation instructions for a grant steering wheel/horn kit. the shoulder bolts hold the adaptor in place.

    Bill Ascheman
    Fiberfab Ford
    Modified 5.0, 5sp., 4:11
    Autocross & Hillclimb
    "Drive Happy"

    #257422
    Paul Mossberg
    Keymaster

    @pmossberg

    A detailed look at installing the VW Duchess steering wheel begins on the fifth page of Part 4 – Body and Interior of the Duchess Assembly manual available here on the site.

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

    #257423
    Jeff
    Participant

    @jeffthornton

    Paul,

    Page 5 of Part 4 says “(note: See steering wheel assembly instruction in the steering wheel box)

    I don’t see those instructions available for download on the site. Do the instruction include a packing list or item description to give specifications on the shoulder bolts? I only have one and took it in to get two more form a “bolt” supply house and they could not even tell me what I had in my hand. You know how some kit say packing list
    1-wheel
    1-horn plate
    3-1/4″ x 1.00 shoulder bolts (what Fastenal thinks)

    #257424
    Paul Mossberg
    Keymaster

    @pmossberg

    Ooops.

    I forget. I don’t have ready access to my assembly photo album. If I have the instructions, that’s where it will be.

    But I believe these will help, especially the second one:

    http://www.grantproducts.com/files/instructions/97520-00-01.pdf

    http://www.grantproducts.com/files/instructions/97506-00-01.pdf

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

    #257425
    Jeff
    Participant

    @jeffthornton

    Thanks Paul!

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.