Beautiful!

Went to Cruisin The Coast this past weekend and it was everything folks say it is. The weather was absolutely perfect. Winston was a big hit with both the young and old. Lots of thumbs up, smiles, waves, compliments and photo’s taken of him. Even had a couple folks from England stop and admire the car. Hooked up with Sarge in Ocean Springs and we…[Read more]

Nice Pic. We don’t get much in the way of fall color down along the gulf coast.

Actually the negative post and connection was tight and didn’t move when I tried to see if it was loose again.  So I was a bit surprised to see that it started up after doing that.

Welcome aboard Royal. I kjnow you’ll enjoy the TD. Looking forward to seeing so photos.

I’ve never heard that one.The trailing arms have squared cut outs to fit the ends of the spring leaves that extend out of the torsion tubes.And it’s not what you do with an adjustable beam either. with the adjustable beam. The traling arms don’t move. One of these:…is welded into the center of each torsion tube and is used to rotate the entire…[Read more]

I wrote to the seller and asked for pictures.

Welcome aboard Royal!We’re glad to have you!Sounds like you’ve been lurking for a while, so you already know there are great people here, with a ton of accumulated TD replica knowledge, not to mention VW, Ford and Chevy knowledge.Click the link in my signature and add your info in a post at the end of the registry!

 They look like CMC/FiberFab windows .As Ed said ,they may not fit even these cars . The shape and size may be close but the zippers were probably sewn in place to match the top they came with.The  zipper may be a different size or brand that may not match the top as well. The price is reasonable if you can make the neccessary modifications to m…[Read more]

Nicely done Montie I’ve got a Red twin of that model.

here’s the link.Buyer beware–looks to me like TD replica tops vary quite a bit, so almost anything you buy that was not made to fit what you have will have to be made to fit. Might be easy. Might be hard.

The link did not work for me.

A beautiful shot, Montie.  It looks like you took out your rear windscreen.

I’ve heard a lot of things about VWs in my 30+ years but have never heard about this one. I know the splines are in the rear on the sprong plates and there are inner and outer splines but have never heard of it on the front beam. Sounds sort of like what you’d do with an adjustable beam rather than a stock front beam. The traiiling arms fit onto…[Read more]

Excellent! Looks like next years October calander photo!

Here’s the link. Reserve price not met yet. http://cgi.ebay.com/ebaymotors/120790159588?ru=http%3A%2F%2F motors.shop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3 Dp3841.m570.l1313%26_nkw%3D120790159588%26_sacat%3D%26_fvi%3 D1&_rdc=1

Okay..You obviously know this TD better than I. But I got some of it right.It was a pretty one. Is there another reason to build one of these other than reliability?As for my project; I’m still trying to get the computer to work.

I was told by the manager/owner of the place where I bought my tires, (where they do a lot of mechanical and engine work also, and on a lot of VW’s, rebuilding them), that the four linkage arms on the ends of the beam can be removed and since each arm is on a spline, they can then be rotated a notch or two when putting them back on into the…[Read more]

Sa-weet!

 Montie, Beautiful car in a beautiful setting!!! Here in NC ,we are not as  far along in the Fall color changes.I’m looking forward to some quiet, curvey,two lane roads with beautiful colors and me driving along soaking it all in.