- This topic has 12 replies, 7 voices, and was last updated 11 years, 7 months ago by
.
-
Posts
-
Set the seatback foam on the wood seatback and something didn’t look right. Shouldn’t the foam be about 1/2 inch larger all around like the seat bottoms?
Thanks guys and gals.
newkitman 2014-04-28 16:09:53 Allen Caron
VW based 53MGTD - "MoneyPenny"
"If one thing matters, everything matters" - from the book The ShackI have a picture but have lost ability to post? looks like a W from the bottom
Can’t get it in private msg either. Will email if you send your address
juneybug2014-04-29 21:43:19Go to the “Post Reply” on the left side and click on it. You will find the post picture option there.
Mike, I have the same problem. Only way I could get it to work is to go to my pictures file-copy with rt click and them paste it in the reply area.
well done Montie Thank you, you’ll probably have to remind me next time
juneybug2014-04-30 21:31:37
Thanks Mike! These pics help a lot.
Allen Caron
VW based 53MGTD - "MoneyPenny"
"If one thing matters, everything matters" - from the book The ShackOne last question for y’all. In all the pictures I’ve seen of the seat back there is a middle and two edge pieces. My instructions don’t show those pieces. Only shows a single rectangular piece. Do all TDR seatbacks have the center and edge pieces? Just wondering if the fabric from the kit will fit.
Allen Caron
VW based 53MGTD - "MoneyPenny"
"If one thing matters, everything matters" - from the book The ShackThe seat back upholstery should be a one piece “pocket” that you stretch around the foam cushion.
Bill Ascheman
Fiberfab Ford
Modified 5.0, 5sp., 4:11
Autocross & Hillclimb
"Drive Happy"Allen, the seatback foam and seat cushion foam in my early FF is flat, one-piece stuff..
Early FF TDr on 69 VW pan
Slowly coming back from the ashes...
- You must be logged in to reply to this topic.