MP Lafer spare parts info.

Home Forums MGTD Kit Cars MP Lafer MP Lafer spare parts info.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #233849
    Olimon Ricardo


    Eduardo Batelli from Sao Paulo, Brazil restores and supplies spare parts for the MP Lafer.

    his e-mail is:

    and also:

    Several years ago while searching for sources of MP Lafer parts I came across his website and

    contacted him regarding my needs and he was kind enough to send me the following pages from

    what appears to be an MP Lafer parts book.

    I ended up placing two different orders with Eduardo and everything I ordered was delivered as

    promised and as agreed so in my case I wouldn’t have any doubts in ordering thru him again. I will

    add that most of the rubber products I received were extrusions that needed to be cut to the exact

    size required.

    if there are any questions regarding these pages fell free to contact me and I’ll answer them as best I


    As far as communicating with Eduardo I would suggest that you send him the page that shows the

    desired parts along with the part numbers required and go from there.

    The items in red are the parts that he quoted me originally.

    (these are the only pages I have )

    Bill Gould


    Wow, that’s exactly what I was looking for. Thanks, Ricardo.

    Eduardo is the guy I had already contacted. He replied, and I told him (in English, translated to Portuguese by Google) what I need, but I haven’t heard back. Maybe he’ll send his current parts pages.

    I really appreciate the help.

    1981 Lafer TI
    1600 cc Type 1 engine

    Olimon Ricardo


    To give you an idea of pricing I’m attaching a copy of my original email confirming the items that I ordered

    from Eduardo along with their prices.

    The prices are in U.S. dollars and the coma (“,” ) is used as the decimal in Brazil so to give you an example

    from my order all the rubber seals marked in red in the parts pages cost a total of $154.00 dlls (154,00 U.S.)

    You could also send him a copy of the pages I uploaded indicating the part numbers you desire from each

    page, I’m sure that would make it easier for both of you.

    (Sorry for the quality but I had to scan my hard copy since I lost the original email to a computer crash )



    Thanks for sharing with the group!

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.