- This topic has 11 replies, 8 voices, and was last updated 11 years, 8 months ago by
.
-
Posts
-
I’ve noticed that some of you have a chrome strip running the length of your hood. In the middle running the entire 42″ length of the hood. This looks very TDish since that strip covered the hinge on “real” TDs. I have a raised fiberglass stiffener rib running that same length with no chrome.
Question: Is that chrome piece just an applique that I can buy and put on my car (to make it faster ;)) or is the hood different on those cars that have chrome?If it is just an add-on, do you know where I can get one? Gotta be better for the Carlisle AutoX, I figger.Mine’s metal and held on by posts. Thinking of replacing it with the same stick-on junk I used on my dashboard. They sell it in several thicknesses & it seems to be all in the $20-a-roll neighborhood. I’m thinking half-inch would look close. Easy-peasy.
My Fiberfab manual says to peel the backing off the strip and attach it to the hood and trim to fit at the front and back. I don’t have the strip but was planning on purchasing it at my flaps (friendly local auto parts store). Like Ed said Easy-peasy!
Allen Caron
VW based 53MGTD - "MoneyPenny"
"If one thing matters, everything matters" - from the book The ShackMine is(was) just a stick on molding cut from a roll. Just pick the width you want.
Bill Ascheman
Fiberfab Ford
Modified 5.0, 5sp., 4:11
Autocross & Hillclimb
"Drive Happy"Center strip is available from Mg Magic. Two are listed on e brass chromed at $98.00 and a stainless steel one at $48.00 .
Mine is a metal strip, held on with body molding clips/nuts.
The hood is flat underneath.Paul Mossberg
Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
2005 Intermeccanica RoadsterIf you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)
3/4-inch wide strip with flat hood under it. On the windshield side there is an end piece–cap. On the front it’s open like a very tiny air scoop. Assume I’m missing that piece.
It seems that we have figured out that if you have a flat hood, you probably have a chrome strip. If you have a raised rib/hump running the length of the hood as on my MiGi, you do not have the chrome strip.
Roy I just replaced them on mine. just went to the local auto paint store looked thru there display book . I paid about 40.00 dollars for it .It came with two strips 13′-0” I just cut the points off the ends,I didn’t like them. I replaced the center,and both sides , only need one peice .
ray102013-03-13 21:05:36TDREPLICA Map
http://www.arcgis.com/home/webmap/viewer.html?webmap=7f9174ad614e43b680deba085b0abf48
- You must be logged in to reply to this topic.