Rockyx, I am very interested in watching the progress on softening your front end.  Please try to take some good pictures. Will be particularly interested in if you had to take the whole beam off and whether you could slip a leaf or two out when the others weren’t watching while working from just one side. Thanks, for taking over as the guinea p…[Read more]

I don’t want to hijack this thread, but want to ask Paul a quick question related to my earlier thread on car height and rubbing tires on the fender edge when making tight turns.Paul, you said in your first post on here that the car height should be 7.5″ off the ground and with a ball joint suspension, the distance between upper and lower shock…[Read more]

 Buzz, I believe your car is a FiberFab. Royal’s is a MIGI. The MIGI’s body is  farther to the rear of the VW pan ,whereas the FiberFabs sit closer to the front of the pan .That’s why the steering box is easier to see on his car. My London Roadster, which usee a Daytona MiGi body sits in the same position. That’s also why the grille is shorter th…[Read more]

When i first got mine i had a similar problem after removing the wipers and all the linkage and motor  and cleaning it  all they have worked fine 4 years now like yours mine sat for 20 some years i also keep rain x in the car just in-case Dan

Roy,  I am mechanically minded but not a mechanic.  However, I jumped right in on the rebuild of my front suspension with the help of guys on this site and Samba. As a matter of fact I’m going to pull mine back apart this weekend and remove the smaller leaves as suggested by folks here (thanks Ed)If you want to give it a shot I (along with o…[Read more]

My question is;who built the car?,you?,or did you purchase.from the pics it looks like a converted super to standard,or as stated the beem was raised,or the front of the body was shimmed up for some reason,You can see too much of the steering box in the pics,you have to get on the ground an look to see mine

Just found this, but I don’t recall if the holes are pre-drilled on my front bumper:
http://www.british-cars.org/mgtd-mgtf1500-bbs/front-license- plate-bracket-2010082223403510288.htm
The quick hit: there are two of these brackets, they bolt to the lower edge of the front bumper and hang down for the license plate.
PMOSSBERG40836.7105555556

The front plate bracket provided by Classic Roadsters is basically a steel tube that fits between the front bumper springs. A threaded rod goes through the tube, through each bumper spring, with an acorn nut on each end.
A license plate size piece of steel is welded to the rod, the plate bolts to that.
Would be very easy to fabricate.

Tks Larry, I took it for a the bumpiest ride on the worst road I could find and nothing changed except that now I need some new dentures.  I just found out that we are getting company next week so I lost my best worker/mechanic/helper (my wife) for a while.  I am still wondering if the leaves come out all together or is it possible to slip them o…[Read more]

 Look in Rockyx’s ”front suspension apart” thread . There are pictures of his disassembled front end. You can see the leaves sticking out of each end of the beam and also the sleeve part of the arms and how far they slide into the beam. It looks to me that they MIGHT be removeable from one side but I wonder if they would slide back into the…[Read more]

Thanks guys.
And especially to Bill C, who did know Lauren when she was just a new born!

I think so.

Congrats Paul.. and say hi to lauren for me …I remember that little girl that
always came with her dad to the New Jersey Replica (NJRC) meetings..All
grown up and a beautiful women now ..Your allowed to brag all u want

One more question before I either dive in or decide to wait til spring.  Am I correct is thinking that if I just take one wheel and the trailing arms off one side then I could loosen the trailing arms on the other side, loosen the center grub and (with a little luck) pull the torsion bar leaf assembly out from the tubes?  Do all 10 leaves come…[Read more]

Hey Roy…
Ed managed a front end job by himself…so you can too! (Sorry Ed, I couldn’t resist.)
Not surprised that removing the shocks did not affect the ride height. Except for something like air shocks, shock absorbers do exactly that…absorb shock. They control compression and rebound, but do not control ride height. The shocks you describe…[Read more]

G’morn guys.  I took the shocks off and I don’t think that shocks are the problem.  Bummer (that would have been an easy fix)!  The installed shocks are Cofap # B.47533N and I have not been able to find anything about them on the internet after a quick search.  The collapsed length is 14 and extended is 17-1/2 between mounts.  The shocks look almo…[Read more]

During the thunderstorm, the wipers slowed down to an eventual stop.  If it was a fuse blown, wouldn’t they have stopped suddenly?

No trouble at all Bill.  It took me several attempts and lots of help from fellow board members here to teach me.Copy your text or full address, then click on the hyperlink button (looks like it might be a globe with chain link or paperclip over it).  Paste your link into the highlighted text.  It’s that easy.

Thanks, Mark. Sometimes I can remember how to set up the links properly, and sometimes I can’t. 

And the shots are coming in. Great ones, so far. Thanks Paul and Tom.OK, another FYI, based on some feedback I just got: don’t not send your excellent photos depicting your well-shined car on a sunny day in front of a pretty background. I don’t mean to dis those. I just mean to also encourage other, less standard calendar type pics if you got them…[Read more]