brake sender switch

Home › Forums › Picture Gallery › TD Replicas › brake sender switch

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 9, 2010 at 10:31 pm #232905
    edward ericson
    Participant

    @edsnova

    So my brake lights weren’t working. I narrowed it down to the pressure switch, ordered a new one ($8), waited a day for it to come in, and tonight popped Bridget’s left front wheel off to discover


    I already had a spare.

    Already attached.

    Switched the wires over et voila! Problem solved.

    Just for future reference, does unscrewing one of these cause air to get into the master cylinder, necessitating a brake bleed?

    March 10, 2010 at 8:54 am #240746
    Paul Mossberg
    Keymaster

    @pmossberg

    Ed,

    My most “VW-expert” friend says to just remove the old switch and quickly screw in the replacement. No air will get in.

    PMOSSBERG40247.371099537

    Paul Mossberg
    Former Owner of a 1981 Classic Roadsters Ltd. Duchess (VW)
    2005 Intermeccanica Roadster

    If you own a TDr and are not in the Registry, please go to https://tdreplica.com/forums/topic/mg-td-replica-registry/ and register (you need to copy and paste the link)

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.