Sorry guys I’m a little late.Been busy with home repairsAnyhow.do a search for chevy powered MG TD/you will find the link to this carShort is it was an old road coase racer

1 word

I gotta chime in here. the only thing mustang 2 aftermarket kits that is mustang 2 is the design.A 10 inch dics brake should give plenty of stopping power even a 9 inch for that matter.I see nothing wrong with a chevette front end,same weight car as a mustang 2.Guys have been dumping small block of 1 type or another into chevettes,vegas,pintos,and…[Read more]

greg I would be interested in parts,if he’s willing to part out or if he has spare parts.I am looking for 65 and up MGB or MGB GT front disc spindles with everything attached.

Here’s the why a 283.

[Read more]

ok I know.But vw also got heat from the exhaust.

Ok my 2 cents.

Not sure what your DOT laws are,but watch yourself.If you add a saftey item you may be required to use it.If it didn’t have shoulder belts/harness from the factory I wouln’t bother.

And don’t bother to ask a law enforcement official on the law.They all have the same answer,DUH I don’t know,depends on the persons mood at the time.

[Read more]

The hardest part was finding the correct angles and mesurements for all the wood.Plenty of pics on the net of rebuilding a “TUB” but no dimentions.I did finally come across someone that did post this needed info with his pics.

I have most of the wood in place,Have to fit and secure two pieces for the rear(hopfully today)then it’s sanding time to…[Read more]

Update;

Transmission fluild also works well.Hold at a higher RPM and pour slowly down the carb.Best recomended on an old back country road as it will produce alot of smoke.

[Read more]

Bill

Paul;

I just browsed though the chevette link.

I guess I should clarify.I have a fiberfab,and an original grill shell is larger,both in hieght,and width.I would almost think that due to patten laws some changes in dimentions would have to be made on a copy.

Not to burst your bubble.But I think they are different in size.I have an original as well as the one on my replica.The original will fit over the replica.

On a side note all it takes is a pin hole on the pump diaphram,or a crack from dry age.CHECK THE OIL what fuel isn’t going to the carbs has got to be going some place.

Well I am in Manitowoc Wisconsin.

Good one paul

The trick is

[Read more]