none of these are mine,, they are all on ebay right now….. the 2nd one is going for over 700.00 (I won’t be buying that one)hehe,, check out number 4, I just wanted to make shure what I was looking for
http://cgi.ebay.com/ebaymotors/Nice-Original-MG-TD-Chrome-Gr ille-Shell-1952_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3…[Read more]

Hi,Not sure how all the manufacturers handled this, but Classic Roadsters Duchess provided a backing plate that hangs between the inner bends of the front bumper spring mounts.It’s basically a steel tube with a piece of flat steel (about 2 inches by 8 inches welded to it. A threaded rod passes through the tube and through holes in each bumper…[Read more]

Hi,

There are actually three grills pictured, right?

The top one does not look like a TD grill. It seems bowed a bit more. Maybe it’s a TF grill?

The grill with the Migi badge looks liek a TD, modified for the Migi
body. The semi-circular cuts on the bottom of each side are similar to
what one has to do for the Duchess body. But they look to be…[Read more]

how about this one……….

I’m, in the Hudson Valley just south of West Point (USMA) and North of NYC.
Mine has a Mustang Chassis and Ford 2.3L engine.  Once I start to snowbird I will get to enjoy it on a frequent basis.
 

Rich  ,  Try europarts 4 auction eBay # 260306284038,310097286940  for the MG logo dices  and many other mg parts and logo items . try   massy 1946 (30205) I bought center bar spinners  from there ,the both together look great on the wheels and are not priced bad at$38.94 for 4. on the spinners . The best part if your centers are rusted and won…[Read more]

witch one of these 2 grills look right for me?…. the older looking one is a real mg grill.. I see that the bottoms are alot differant… the other one is a fiberfab part # 2015-L 

Thanks Paul,
disregard my PM I found the price on the home site. I will get a badge thru pay pal today…
Thanks,
Terry

Hi Terry,Yes. Just click the “Our Store” link over on the left and you will find all the ordering info.

are these badges still avaiable? If so I would like to get one
Terry

thanks Rich,
I like the look of the wheels over mine. you can see my pics under 68c10.
I have the VW base FF it has the hub cab wires …I am not sure how much I like them at this point..I like the Idea of keeping the kit stock etc. But….(there is always a but) my past behaviors prove that I am not one to leave things alone LOL
I am thinking of…[Read more]

I looks like a twin to mine..I just picked up…
 
Nice car!
 
Terry

here are a few more pics of my recent purchass…more of a gift than a buy.  I am really happy with it….cant wait for summer…cruizing the beach towns is gonna be fun!

will do but it’s snowing here today and is about 20* so I might wait till it stops……………….I’m ready for spring!

Where are you in NY? Iam from Wolcott. Located inbetween Syracuse and Rochester, near the lake. I have a Chevy front engine TD that is also red. Your right it’s cold everywhere in NY!!

Geoff,
Well it was a great plate #. Unfortunatly it’s been taken. So I will have to be creative and find a plate # on my own. I hope they enjoy it.
Thanks again, Bill

68C10,
I forgot to mention, these wheels only came with the Ford/Chevy FiberFab kits. VW based kits had the spoke hub caps that fit on what I believe are standard VW 15″ wheels.
Rich

68C10,
These are Baskets. They are the wheels that came with the FiberFab replica. The kit consists of a flanged center hub that fits the center hole of the wheel. The larger shaped cap and Wire Basket are held in place by screws and an outer hub “cap”. All screws fasten to the inner flanged center hub. A pretty clever design.
Rich

Hi Geoff,

Thanks for the plate info. I will see if I can get it. Do you have your car home yet? You will have plenty of sunny days to enjoy it there, not like our chilly NY weather.

Thanks again! Bill

Hey bigracedadThey do look like the repro TD latches. If not, they are close enough that a repro original set will fit. You should replace the latch and striker as a set.If you want to be sure about hte fit, take a photo with a tape measure next to the latch or post the exact measurements. I can compare against my TD.