well i think that Mark has got it right these cars are a tinkiers dream ,  Dan R

  I’m liken it a lot  Dan R

 GOOD DEAL ,,Pat   enjoy all the time you will have driving her and enjoy the repairs as I do a labor of joy with each turn of the wrench    Dan R

 Xenon lamps do put out a lot of light but do take a lot of power to do it if you charging system can handle it do it i do not do that much or type of speed to make that kind of change I just like  40mph not my age in speed   Dan,,, good luck

 I user Harley mirrors from a older Tour-glide don’t know  the year I mounted them high on the cowell and i can see behind me well for  $10.00 for the pair at a swap meet. good luck  Dan

 Bill it looks great  Dan

 Paul ,you do a great job and we all appreciate all the work you do Dan

 just follow  DO and UNDO arrow MG nuts and wings are marked I think most after market must be also DanDan R40708.8951967593

 My last 2 MGs both midget and B all I ever did was just hit them tight and never had trouble from them, they were the big nut type,,  Dan

 My wire baskets looked fake to me I solved that fake look to my satisfaction by painting the ‘bell’ in hammered black and with the addition of trim rings I like the look ,, now i am thinking of painting the spokes GLOSS black like the new Morgans  Dan

 A ball cap just does not cut it at any speed over 10mph with the wind ,,,,,woooo there it goessssssssssss  

 I used aluminum bar stock , bought at Lows and it slips in the slot and the top pocket and has never come out ,easy to insert and remove it will never break and will not bent when trying to insert. Dan R

 Lots of hail the size of base balls… trashed my wife’s PT Cruiser convertible not the cloth top but most of the sheet metal the TD was under the carport nothing happened to it..  the roof on the house and carport is dented all over a Le baron conv. is no-longer worth fixing BUT KNOWONE was hurt,so I guess all is OK 

 HI , Daniel I hope you enjoy all the good people here on site and your  TD.   Dan R

  Paul ,,these cars are made in indonesia and brought to Knoxville by Ross Marshall I was in one just the other day and was talking to him the car is 5 inch. wider than a real TD and 12 inches longer  the one i was in had all leather gut tan and was BRG the car “passes US front.,,,rear and side crash test” 2.0 Toyota ,5 speed ” looking for a p…[Read more]

 BDriver first welcome to the group ,.I have a Chevette  powered TD f/f a little under powered but will do 60 all day long I never did a long interstate drive most of the time 30 will do just fine , as for the top, some time you do need it up rather watch the weatherit takes longer to put the top up than change the oil I have zip on side c…[Read more]

Hi ,Almost ,,,good luck and much fun with your new project….,,Dan R

Almost,,,,215 Buick wow that could be quick , but if you use Rover parts you would have a true Half/Breed a British hart , an American skeleton all wrapped up in knock off Designer clothes Good luck . There plenty of Rovers in junk yards  OK now what is the year of the Champion  Dan

 Hi Greg ,,,,,,,,,,I think if you look at past posts you WILL find all the infomation you need .. good luck  Dan R

 BEND ,, that is the only way to do it under the master cylinder there is no room to the right to move it with the intake there  so just disconnect the break peddle and remove it out of the car remember the car is plastic and Will Burn
use a hot wrench [torch] using a vice to hold it i cut apiece of tin as a guide as where i wanted it bend to . D…[Read more]